20KPPS 30KPPS laser scanning galvo scanner ILDA Closed Loop max 30kpps for laser

Description

20Kpps laser galvo sets scanner ILDA Closed Loop max 30kpps
Product Description
Standard package includes(same as the picture showing) :
2×Scanners
1x main board (show card)  (Red Color , Green Color,optional)
2×Driver board
2×Mirrors
1×Scanner mount
1×power supply (PUS)
2×Cables driver to scanner
2×Cables driver to PUS
2×Cables driver to input signals
2x DB25 connector
1x microphone connector
1x dipswitch
1×User manual
SPECIFICATION
Closed Loop Moving Magnet Scanner
Input resistance: 200K ohms, differential
Signal Input voltage:±5V
Input voltage requirements: +15V/1.0A,-15V/0.6A
Operating temperature range:0~50 degrees C
Optical angle:±30° max
Scanner speed:>15Kpps (30K ILDA test-pattern ,±20°optical)
Mirror dimensions WxL: 7mm*11mm*0.6mm (wide wave-length)
Board size:7.4cm (long) * 5.0cm (wide) * 2.5cm (high)
The Scanner was measured by an independent source and confirmed by the factory
with PANGOLIN QM2000 card.Running at the desired output speed. Using the standard
ILDA test pattern. Laboratory power supply at +/-15VDC,room temperature. Windows
PC with Pangolin,12/30k ILDA test-frame full size. 7x11x0.6mm mirror was used during
measuring period. The galvo is fixed in the standard mounts on an aluminium base plate,
no forced cooling.
Deflection angle
Operating voltage
Speed@ Mirrors size
20º optical deflection
+/-15V
18Kpps @ 7*11*0.6
15º optical deflection
+/-15V
25Kpps @ 7*11*0.6
5º optical deflection
+/-15V
30Kpps @ 7*11*0.6
Power input
XH-3 Connector pins
Description
Remark
Cable color
3
+VCC
+15V/1.0A
RED,24AWG
2
GND
BLACK,24AWG
1
-VEE
-15V/0.6A
WHITE,24AWG
Signal Input
3
Control signal Y+
-5V~+10V analog signal
2
S-GND
Ground
1
Control signal -
-5V~+10V analog signal
Potentiometer description
IS Input scale (adjusted only in factory)
SG Servo gain (power of the feedback signal for internal PID controller
LFD Low frequency damping (correct overshoot)
HFD High frequency damping (correct undershoot)
LIN Zero offset (electrical offset of the driver, adjusted only in factory)
PS Position scale (increases or decrease input sensitivity of the computer,  DO NOT change it)
SERVICE & SETUP:
This is a commercial product which may require ongoing and initial set-up, cleaning, maintenance and care.
Operational Training and tutorials are not included with purchase but support is available.
Shipment
We Ship to eBAY address only, else address is not acceptable.
1. United States:3-6 business days by UPS .
2.For those customers who live in other countries,we will send item from China. Delivery time is 5~8 business days. Will ship by DHL,FedEx,EMS.To Brazil ,Russian,Argentina,15-50 business days by Russian Air or China air post. (Tax maybe required if send from China,and tax is buyers' responsibility according to ebay policy.
Payment
We accept payment only by Paypal .
Buyer should complete the payment in 14 days since he purchases the item, or we will open a un_paid case .
Guarantee
1. Brand new model.12-Months Warranty from the date of package receipt.All items will be inspected and thoroughly tested
by a QC before shipment .
2. We have been selling DJ equipment for years in this industry and get FREE replacement parts for after-sale purpose more and more clients can benefit from it .
3. If the item was sent back for repair(, buyer takes on the returning fee,We will be responsible for resend.
4. Buyer should check the package once receiving. If the package damage during transportation,please contact us promptly .
In case of DOA (Dead on Arrival), please report within 3 days and return the case within 7 days after receiving the items.
(The date on Post Mark is for standard). After our receiving of the items in good appearance condition, you may have replacement or refund as long as we cancel the order on ebay.
5. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We work hard to make sure  EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. For those leaving neutral or negative feedback without contacts,they will lose warranty and all after-sales service,and will be added to a shared blocked buyer/bidder list.
6. If you are satisfied with the product you received,please leave us positive feedback and 5 scores DSR .
You agree to all of the above-listed policies upon bidding on and winning this auction!
Contact Us
We stand behind our products.
1.If you have any question or concern, please do not hesitate to contact us.We will try our best to
provide good quality products,low price,fast shipping and excellent customer service.
2.E-mails are answered Monday through Saturday. Please allow me to reply your emails in 24-48 hours for a response ...
3.Please do contact us first before leaving low ratings or negative/neutral feedback.